DeltaQ Gateway Quick Install Manual

1. Place

Place the gateway on a DIN rail or place it next to the BMS computer.

A connection to the BMS and internet network  as well as a power plug needs to be available.

The gateway can be pushed in a DIN rail without tools.

Remove the gateway using a flat head screwdriver if necessary.

2. Power

Plug the power supply in a power socket, and in the ring connector of the gateway.

3. Connect 

Connect the network port on the gateway to the internet connection.

* If the BMS network is on a seperate network, an extra USB-RJ45 connector is in the box.

4. Complete

Take a picture of the installed module, and send it to support@deltaq.io.

Congratulations on the successful installation!

• Related Articles

• I have a question or a complaint

  We will be glad to help! You can choose to contact via mail or phone, or submit a ticket at the bottom of this page. We will get back to you as soon as possible during our office hours. Don't forget you can access the DeltaQ dashboard 24/7 at ...